||Please allow 4-6 weeks for product to be made.
This sleepy little bear with his two back legs hanging down is carved out of pine and measures approximately 30" long by 12" in diameter and weighs approximately 30 pounds. It is designed to lay on a 2" x 6" fence or deck rail, so it has a 5 1/2 wide slot cut out of the bottom to accommodate it's laying flat on the rail. You can further secure the bear to the rail by screwing it down. This first bear is done in black, and the second photo shows the bear is in the "grizzly" color...brown with a black overspray giving it a natural look.
Also available in the 2" x 4" size which has a 3 1/2" wide slot cut out of the bottom lay on a 2 x 4 rail or post. Please specify.
If this isn't the size rail that you have and need a different size, please email me at email@example.com.
We can also make them to fit on a log rail, so check us out!
THE BEAR IN THE MAKING:
Our bears are carved out of pine. They are cut out with a chainsaw and then placed in a kiln to dry. Once the drying process is complete, we continue to detail them using various grinders and sanders, as well as carving knives.
We then mix pigment with Marine Spar Varnish to give the bear its color. After doing the detail painting on the face and paws (if needed), we then clearcoat the entire piece with the spar varnish which makes your bear suitable for the great outdoors as well as in the house!
All of our bears have a relief cut up the back to help relieve any possible stress in the log as the wood expands and contracts throughout the seasons. This is a very normal occurance, and in this way most of the expansion is directed towards the cut which lessens the chance (and hopefully eliminates the chance) of cracks in undesireable places.
This bear is made by artist Andy Kosel, from The Country Workshop out of Red Lodge, Montana and signed with his initials.
Included with each bear is a care tag giving you instructions on how to keep your bear looking as good as new!